BIBO

BIBO ( BiB3O6) is a newly developed nonlinear Optical Crystal. It possesses large effective nonlinear coeffcient, high damage threshold and inertness with respect to moisture. Its nonlinear coefficient is 3.5-4 times higher than that of LBO,1.5-2 times higher than that of BBO. It is a promising doubling crystal to produce blue laser.

BIBO Structural and Physical Properties

Crystal Structure	Monoclinic, point group 2
Lattice parameters	a = 7.116 Å, b = 4.993 Å, c = 6.508 Å Z =2, b=105.5868¡ã
Melting point (congruent)	726° C
Hardness	5 - 5.5 mohs
Specific heat	0.5 J/gm-K at 330 K
Thermal expansion	(4.8E-5[X], 4.4E-6[Y], -2.69E-5[Z])
Density	5.033 g/cm^3
Long term stability	Insensitive to moisture

BIBO Specifications:

Transmitting wavefront distortion: less than l/8 @ 633nm

Dimension tolerance: (W ± 0.1mm) x (H ± 0.1mm) x (L + 0.2mm/-0.1mm)

Flatness: l/8 @ 633nm

Scratch/Dig code: 10/5 to MIL-O-13830A

Parallelism: better than 20 arc seconds

Perpendicularity: 5 arc minutes

Angle tolerance: Dq < ± 0.3°, Df < ±0.3°

Standard Products

Dimension	Application	Coating	Type
3x3x5mm	SHG or THG	AR coating	I
3x3x7mm	SHG or THG	AR coating	I
3x3x10mm	SHG or THG	AR coating	I
4x4x10mm	SHG or THG	AR-coating	I

Keep in touch with us

Contact us sales@eforcelaser.com.au

Lasers

This declares that our designated product complies with the essential protection requirements of Council Directive 89/336/EEC to electromagnetic compatibility and LVD 73/23/EEC amended by 93/68/EEC.
All our products complies with the regulations for the administration and enforcement of the Radiation Control for Health and Safety Act of 1968 (title 21, code of Federal Regulations, Subchapter J) as they pertain to Annual FDA Report.

Optics

Assessories

European Directive 2002/95/EC (also referred to as the 'RoHS' Directive) restricts the use of certain hazardous substances in electrical and electronic equipment offered for sale in Europe beginning in 2006.
JQA introduced its product safety certification system in January 1995. JQA carries out a safety test for each product, confirms the quality assurance system of each factory, and gives a certificate to each product.