OEM-D-462

OEM-D-462/2500-5000mW - up to 5000 mW, 462 nm blue diode laser

　

Specification

　

Model	OEM-D-462
Wavelength (nm)	462±3
Output power (mW)	>2500, 3000, … , 5000
Operating mode	CW
Power stability (rms, over 4 hours) at 25℃	<1%, <3%, <5%
Warm-up time (minutes)	<5
Beam divergence, half angle (mrad)	0.7×0.1
Beam diameter at the aperture (mm)	~3.2×3.2 (1/e2)/ ~2.2×2.2 (FWHM)
Polarization direction	Horizontal+ Vertical
Beam height from base plate (mm)	34.5(OEM-D)	68.2(D-462-HS)
Operating temperature (℃)	25+/-3 (OEM-D)	10-35(D-462-HS)
Power supply(90-264VAC or 6V,10V&8A)	PSU-H-LED/PSU-H-FDA/PSU-D-OEM-H
Expected lifetime (hours)	10000
Modulation option	TTL/Analog 1Hz-5KHz, 1Hz-10KHz, 1Hz-30KHz, and TTL on/off
Warranty time	The warranty is 3 months, excluding the LD failure.
Datasheet

　

Features	Applications	Drawings
Output Power up to 5000 mW TEC cooling system Lightweight, compact design Best reliability and lifetime	Measurement Spectrum analysis	OEM-D-462 laser head D-462-HS laser head PSU-H-LED power supply PSU-H-FDA power supply PSU-D-OEM-H power supply Adapter for PSU-D-OEM-H
		Options
		Fiber coupling lasers Line lasers Single longitudinal lasers

Keep in touch with us

Contact us sales@eforcelaser.com.au

Lasers

This declares that our designated product complies with the essential protection requirements of Council Directive 89/336/EEC to electromagnetic compatibility and LVD 73/23/EEC amended by 93/68/EEC.
All our products complies with the regulations for the administration and enforcement of the Radiation Control for Health and Safety Act of 1968 (title 21, code of Federal Regulations, Subchapter J) as they pertain to Annual FDA Report.

Optics

Assessories

European Directive 2002/95/EC (also referred to as the 'RoHS' Directive) restricts the use of certain hazardous substances in electrical and electronic equipment offered for sale in Europe beginning in 2006.
JQA introduced its product safety certification system in January 1995. JQA carries out a safety test for each product, confirms the quality assurance system of each factory, and gives a certificate to each product.