Nd:Yag |
|
|
Nd:YAG (Neodimium Doped Yttrium Aluminum Garnet) has been widely used laser crystal for solid-state laser. Its laser parameters are a good compromise between the strengths and weaknesses of its competition. Nd:YAG crystals are used in all types of solid-state lasers systems-frequency-doubled continuous wave, high-energy Q-switched , etc.. Compared with others laser crystals, its fluorescence lifetime is twice more than Nd:YVO4, and thermal conductivity is also better.
|
|
Specifications
|
|
Doping(atm%):
|
0.9%~ 1.1%
|
Orientation:
|
<111> crystalline direction
|
Wavefront distortion:
|
l/8 per inch @ 633 nm
|
Extinction Ratio:
|
>28dB
|
Dimension Tolerances
|
Rods with diameter: ¡À0.025 mm , Length: ¡À0.5 mm
|
Surface quality:
|
10/5 Scratch / Digper MIL-O-1380A
|
Parallelism:
|
< 10 arc seconds
|
Perpendicularity:
|
< 5 arc minutes
|
Clear Aperture:
|
>90%
|
Flatness:
|
<l/10 @ 633 nm
|
chamfer:
|
<0.1 mm @ 45deg.
|
Barrel Finish:
|
50-80 micro-inch (RMS) ,
|
Anti-Reflection Coating:
|
R < 0.20% @ 1064 nm per surface. Damage threshold over 1GW/cm2@ 1064nm, 10 ns and 10 HZ.
|
High-Reflection Coating:
|
Standard HR coating with R>99.8% @ 1064nm and R<5% @ 808nm
|
|
|
Standard Products
|
|
Doping
|
Dimension
|
Coating
|
1%
|
f3X50mm
|
AR/AR@1064nm
|
1%
|
f4X40mm
|
AR/AR@1064nm
|
1%
|
f6X60mm
|
AR/AR@1064nm
|
1%
|
f6X80mm
|
AR/AR@1064nm
|
1%
|
f6X100mm
|
AR/AR@1064nm
|
1%
|
f6X120mm
|
AR/AR@1064nm
|
1%
|
f8X120mm
|
AR/AR@1064nm
|
1%
|
f8X135mm
|
AR/AR@1064nm
|
|
|
Our standard production of Nd:YAG laser rods includes:
- Nd dopant concentrations from 0.3 up to 1.3 at. % of Nd/Y
- Rod diameters from 2 mm up to 12 mm
- Rod lengths up to 160 mm
- Barrel surface fine ground, polished or grooved
- Perpendicular or tilted ends up to Brewster angle
- Polishing according to DIN and MIL standards
- A wide variety of anti-reflection, partial or high reflection coatings
- AR coatings with R < 0.2 % and the damage threshold higher than 15 J/cm2 for 10 ns pulses
|
|