Cr:YAG

Cr4+:YAG provides a large absorption cross section in the 0.9-1.2 micrometer spectral region, which makes it an attractive choice as a passive Q-switch for the diode or lamp pumped Nd:YAG, Nd:YLF, Nd:YVO4, Yb:YAG lasers. Cr4+:YAG has high damage threshold, good thermal conductivity, good chemical stability and is resistant to ultraviolet radiation. Cr4+:YAG can be also used for tunable lasers with output adjustable between 1350-1550 nm. It can generate ultrashort pulses when pumped at 1064 nm by a Nd:YAG laser.

Cr:YAGSpecifications

Formula:	Cr4+:Y3Al5O12
Crystal Structure:	Cubic Garnet
Dopant Level:	0.5 mol% ~ 3 mol%
Thermal conductivity [W/m/K]:	12.13
Hardness:	8.5 (Mohs)
Damage Threshold:	> 500 MW/cm2
Refractive Index:	1.82 @ 1064 nm

Standard Products

Our standard design of Cr4+:YAG disk

diameter from 2 up to 10 mm
Surface flatness - /10
Surface figure - S/D 10/5
End face parallelism - 20 arcsec.
AR coated (85 % of aperture) - R = 0.2 %
Partial and HR coating upon request

Keep in touch with us

Contact us sales@eforcelaser.com.au

Lasers

This declares that our designated product complies with the essential protection requirements of Council Directive 89/336/EEC to electromagnetic compatibility and LVD 73/23/EEC amended by 93/68/EEC.
All our products complies with the regulations for the administration and enforcement of the Radiation Control for Health and Safety Act of 1968 (title 21, code of Federal Regulations, Subchapter J) as they pertain to Annual FDA Report.

Optics

Assessories

European Directive 2002/95/EC (also referred to as the 'RoHS' Directive) restricts the use of certain hazardous substances in electrical and electronic equipment offered for sale in Europe beginning in 2006.
JQA introduced its product safety certification system in January 1995. JQA carries out a safety test for each product, confirms the quality assurance system of each factory, and gives a certificate to each product.