405nm Single Mode Laser Diode

Laser diode provided by EF optics at 405 nm provide state-of-the-art power and brightness. The single mode, narrow line width, small emitting aperture, combined with low beam divergence, make these devices the highest-brightness family of CW diode lasers available in the industry.

Standard Product Specifications for 405 nm Diodes

Item	Symbol	SLD-405-20	SLD-405-50	SLD-405-120	SLD-405-150	Units
CW Output Power	P	20	50	120	150	mW
Peak Wavelength	λp	405±2	405±2	405±5	405±5	nm
Package		TO18
Threshold Current	Ith	≤0.032	≤0.032	≤0.035	≤0.045	A
Operating Current	Iop	≤0.043	≤0.066	≤0.12	≤0.14	A
Slope Efficiency	η	≥1.8	≥1.4	≥1.4	≥1.6	W/A
Operating Voltage	Vop	≤5.2	≤5.6	≤4.8	≤5.0	V
Horizontal Beam Divergence	θ∥	≤9	≤9	≤9	≤8.5	deg
Vertical Beam Divergence	θ⊥	≤20	≤20	≤20	≤19	deg
Spectrum FWHM		<1	<1	<1	<1	nm
Wavelength Temperature Coefficient		0.054	0.054	0.3	0.2	nm/℃
Polarization		TE	TE	TE	TE
Storage Temperature	Tstg	-40~85	-40~85	-40~85	-40~85	℃
Operating Temperature	Tc	-10~70	-10~70	-10~70	0~80	℃

Keep in touch with us

Contact us sales@eforcelaser.com.au

Lasers

This declares that our designated product complies with the essential protection requirements of Council Directive 89/336/EEC to electromagnetic compatibility and LVD 73/23/EEC amended by 93/68/EEC.
All our products complies with the regulations for the administration and enforcement of the Radiation Control for Health and Safety Act of 1968 (title 21, code of Federal Regulations, Subchapter J) as they pertain to Annual FDA Report.

Optics

Assessories

European Directive 2002/95/EC (also referred to as the 'RoHS' Directive) restricts the use of certain hazardous substances in electrical and electronic equipment offered for sale in Europe beginning in 2006.
JQA introduced its product safety certification system in January 1995. JQA carries out a safety test for each product, confirms the quality assurance system of each factory, and gives a certificate to each product.